Mazda World Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Just got a 92 b2600 and the RFW light was always lit up, so I pulled off the vacuum line and pushed my acuator over to unlock the front diff but my vacuum line has constant vacuum, ive tried switching solenoids and still have vacuum all the time, is there something hooks up wrong
 

·
Registered
Joined
·
12 Posts
I have a 1990 b2600i 4x4. My RFW light is on when I start the truck but I can turn it off at the button. The actuator at the transfer case moves when I unlock it. I put a new switch in the dash, but it does the same thing. I'm not sure if it is supposed to stay off until I put it in 4wd. That's all I got for you. Can you turn it off at the switch? I'll be following this.
 
1 - 4 of 4 Posts
Top