Mazda World Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Like the title says, I've got a 98 b4000. Was driving down the road and it died, just like you'd turned the key off. No sputter, no chugging, just off. I've checked the fuel pump. I have fuel, it has spark, replaced crank position sensor and ignition start switch. When it cranks it acts like it wants to start but as soon as the key goes to the run position it stops. I'm at a loss and could use any help/advise. I havent found any bad or blown fuses.
 

·
Registered
Joined
·
137 Posts
Remember: just because the engine can crank fine, doesn't mean that the electrical part of the ignition switch (the "run" circuit) is OK. So I'd check the "run" position of the ignition switch, make sure that's working correctly. There are separate circuits for running in the "Start" position and the "Run" position.
 
1 - 2 of 2 Posts
Top