Mazda World Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I have a '99 Millenia with 109K miles. There were no Instrument panel lights on. I replaced rear brakes completely and put new pads on the front. When I restarted it, the ABS & Traction Control lights were on. I have scoured the internet for information on how to scan for codes and found some very vague information about jumping a pin to ground but not where the pin is located or what the codes mean if I can generate any.

I would appreciate a diagram or photo showing where the connector is that I should jump and what the resulting codes mean.
Thank you
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
I tried 2 different jumper locations and nothing flashed at all. 2 of the 4 lights (ABS & TCS) went off for the first time since I renewed my brakes. TCS Off and 4 wheel ABS are still on. Any ideas?
 
1 - 3 of 3 Posts
Top