Mazda World Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Has anybody have a problem with code P0606, 2 rebuild pcm ,same code drives fine for 20 minutes and idle goes bad no power , any ideas?
,coils are new
 

·
Registered
Joined
·
1 Posts
Check out Mazda TSB SA-020/19 . The issue you have is a corroded connector in the driver's rear quarter panel. You will need to cut and splice over the connector. It also mean you have some type of water leak in the trunk area.
 
1 - 2 of 2 Posts
Top