Mazda World Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I need help, how do I remove the clutch master cylinder on my Eunos 30X ,there is a big nut on the engine bay side of the firewall holding one side of the master cylinder mounting ,the other mounting hole of the cylinder appears to be held by a bolt from inside the car. Any suggestions appreciated. Thanks.
 

·
Registered
Joined
·
14 Posts
Search on youtube for your car and repair required (Eunos 30x clutch master cylinder removal), some auto parts stores have on their web site a how-to, like AutoZone
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Search on youtube for your car and repair required (Eunos 30x clutch master cylinder removal), some auto parts stores have on their web site a how-to, like AutoZone
Search on youtube for your car and repair required (Eunos 30x clutch master cylinder removal), some auto parts stores have on their web site a how-to, like AutoZone
Search on youtube for your car and repair required (Eunos 30x clutch master cylinder removal), some auto parts stores have on their web site a how-to, like AutoZone
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #4 ·
Thanks for your reply, I decided that the only way to do this was not to remove the clutch master cylinder , I did it from inside the car with the master cylinder in place ,this was probably the most difficult thing I have ever done, not recommended . Regards John.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top