Mazda World Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
First time Poster I need your guys help pöz my b2600i won't start first was not getting spark so replaced the coil and New distributor still no spark replaced ecm with rebuilt one have spark now. But still would not start checked compression its good fuel pressure is good getting 12 volts at injectors but no triggern signal does it come from distributor or ecm does anyone have wiring Diagramm? Any help would be great! Thanks
 

·
Registered
Joined
·
2 Posts
l had the same problem and did a little research online. Turns out the ECM have a problem with the capacitors leaking and created problems with the circuit board. Sent ECM to Foreign Auto Computer Repair in TX. Fixed problem $250
First time Poster I need your guys help pöz my b2600i won't start first was not getting spark so replaced the coil and New distributor still no spark replaced ecm with rebuilt one have spark now. But still would not start checked compression its good fuel pressure is good getting 12 volts at injectors but no triggern signal does it come from distributor or ecm does anyone have wiring Diagramm? Any help would be great! Thanks
 
1 - 3 of 3 Posts
Top