Mazda World Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Does anybody know if there is a way to re-program the keyless entry remote so you don't have to hold the unlock button down forever for it to unlock all doors? I hate that!!!

I want to have it open all doors with one click, or maybe be able to hit it once to unlock the drivers door and twice to unlock all doors.

Is there a way to do this? I know that you can do that with other cars.
 

·
Registered
Joined
·
72 Posts
Easy. Get into the car, leave door open (less physical workout later). Put in the key and turn to ON (do not start the car) and OFF 3 times. Then press and release the switch that turns on door and dome lights 3 times also. Switch is located on the doorstep close to the pilar. Or you can shut and open the door 3 times. After that you should hear the chime go on in the car. Start pressing lock or unlock button on the remote. Once the sensor picks up the signal, you should have door locks going on or off. Sounds like a joke, doesn't it?

Well, after posting this, I found the technical article on it by Shayaan.... :blush:



Last edited by Giedrius at Oct 1 2002, 01:01 PM
 
1 - 2 of 2 Posts
Top