Mazda World Forum banner

1 - 2 of 2 Posts

2 Posts
Discussion Starter #1
Hey all I have a Mazda bj 323 1999 protege

I have an erratic idling condition since we have done the following repair. Sump was removed to repair an oil leak and re sealed. Front pully and trigger sensor were removed and refitted at the same belt was removed thinking that we might need to replace front crank seal as it was OK we aligned the gear timing marks and refitted the belt. Exhaust header pipe was also removed and refitted. Engine was running fine before. but since the repair idle seems to be hunting. All connections have been checked and as far as we know are correct but idle contions remain.

Has anyone had the same problem or know what it could be or what the fix could be ?

Thanks in advance
1 - 2 of 2 Posts