Mazda World Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a DrawTite Class III hitch for a 2016+ Mazda CX-9. It comes with a ball mount and 1-7/8" ball. It also comes with a Plug-n-Play wiring harness that connects right into the factory tow package wiring. Very easy to install. This package was around $250 brand new. Barely used. We used this to tow a trailer twice in 2 years. I bought all this from etrailer.com.

The only thing I would say you may need is a new hardware kit. The plates that hold the bolts up in the frame are a little bit bent from tightening them down. If you are handy, you'd probably be able to maybe heat them up and straighten them out. You can buy a new hardware kit here for about $50: https://www.etrailer.com/Accessories-and-Parts/etrailer/RHK.html

You will also need a new bolt fish tool like this one (you'll need to verify bolt size) as I don't have the original tool anymore: https://www.etrailer.com/Tools/Curt/C58400.html

I installed this on a leased CX-9 that I back a few months ago. Local pickup preferred due to the item being so heavy.
 

Attachments

1 - 1 of 1 Posts
Top