Mazda World Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I was replacing my turn signal/wiper switch and was separating the plugs from the switch, but it slipped and the four indicidual wires plugged in the device came off before I could record where they are supposed to reside. Can someone direct me to where I can find the proper connection order for these wires. Pics attached.
 

Attachments

·
Registered
Joined
·
4 Posts
Discussion Starter · #5 ·
Your truck is basically a Ford Ranger.......here is a YT video that you can pause to look at several of the multi-function switch connectors.......don't know if it will help you, but figured I would throw it out there.
Let us know if you get it figured out......and post some pics of it after you do! It may help another B-truck owner in the future!

Thank you!
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #6 ·
Thanks again. That video was very helpful. I have hi-low beam lights, and wipers....but no turn signals or flashers. I replaced all the fuses today. I replaced the flasher last Saturday and the signals worked...until I used the flasher then it all stopped.

I'm researching the issue now.
 
1 - 4 of 4 Posts
Top